File PDF .it

Condividi facilmente i tuoi documenti PDF con i tuoi contatti, il Web e i Social network.

Inviare un file File manager Cassetta degli attrezzi Ricerca PDF Assistenza Contattaci



MIR .pdf



Nome del file originale: MIR.pdf
Titolo: Config.book(MIR.fm)
Autore: BAX01855

Questo documento in formato PDF 1.5 è stato generato da FrameMaker 7.1 / Acrobat Distiller 6.0.1 (Windows), ed è stato inviato su file-pdf.it il 20/05/2015 alle 14:43, dall'indirizzo IP 93.64.x.x. La pagina di download del file è stata vista 1258 volte.
Dimensione del file: 678 KB (17 pagine).
Privacy: file pubblico




Scarica il file PDF









Anteprima del documento


DRIVER CONTROLS

SECTION

MIR

MIRRORS

A

B

C

D

E

CONTENTS
PRECAUTION ............................................... 2
PRECAUTIONS ................................................... 2
Precaution for Supplemental Restraint System
(SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" ................................................................... 2

PREPARATION ............................................ 3
PREPARATION ................................................... 3
Special Service Tools .............................................. 3
Commercial Service Tools ....................................... 3

SYSTEM DESCRIPTION .............................. 4
COMPONENT PARTS ........................................ 4
Component Description ............................................. 4

WIRING DIAGRAM ....................................... 5
DOOR MIRROR SYSTEM ................................... 5

SQUEAK AND RATTLE TROUBLE DIAGNOSES ............................................................... 7
Work Flow ................................................................. 7
Inspection Procedure ................................................ 9
Diagnostic Worksheet ..............................................11

REMOVAL AND INSTALLATION ............... 13

DOOR MIRROR REMOTE CONTROL
SWITCH (MIRROR SWITCH/CHANGEOVER
SWITCH) .............................................................. 6
Component Inspection .............................................. 6

SYMPTOM DIAGNOSIS ............................... 7

G

H

INSIDE MIRROR ............................................... 13
Exploded View .........................................................13
Removal and Installation .........................................13

I

OUTSIDE MIRROR ........................................... 14
Exploded View .........................................................14
DOOR MIRROR ASSEMBLY ....................................14
DOOR MIRROR ASSEMBLY : Removal and Installation ..................................................................14

J

K

GLASS MIRROR ........................................................15
GLASS MIRROR : Removal and Installation ...........15

Wiring Diagram ......................................................... 5

DTC/CIRCUIT DIAGNOSIS .......................... 6

F

MIR
DOOR MIRROR COVER ...........................................15
DOOR MIRROR COVER : Removal and Installation ...........................................................................15

M

DOOR MIRROR REMOTE CONTROL
SWITCH ............................................................. 17
Exploded View .........................................................17
Removal and Installation .........................................17

N

O

P

Revision: 2011 October

MIR-1

2012 JUKE

PRECAUTIONS
< PRECAUTION >

PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"

INFOID:0000000007578716

The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the “SRS AIR BAG” and “SEAT BELT” of this
Service Manual.
WARNING:
Always observe the following items for preventing accidental activation.
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision that would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see “SRS AIR BAG”.
• Never use electrical test equipment on any circuit related to the SRS unless instructed to in this Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness
connectors.

PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
Always observe the following items for preventing accidental activation.
• When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the
ignition ON or engine running, never use air or electric power tools or strike near the sensor(s) with
a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.

Revision: 2011 October

MIR-2

2012 JUKE

PREPARATION
< PREPARATION >

PREPARATION

A

PREPARATION
Special Service Tools

INFOID:0000000007578717

B

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
C

Tool number
(Kent-Moore No.)
Tool name

Description

D

(J-39570)
Chassis ear

E

Locates the noise

F

SIIA0993E

G

(J-43980)
NISSAN Squeak and Rattle Kit

Repairs the cause of noise

H
SIIA0994E

Commercial Service Tools

INFOID:0000000007578718

Tool name

Description

I

J

K
Remover tool

Removes the clips, pawls and metal clips

MIR
JMKIA3050ZZ

M

N

O

P

Revision: 2011 October

MIR-3

2012 JUKE

COMPONENT PARTS
< SYSTEM DESCRIPTION >

SYSTEM DESCRIPTION
COMPONENT PARTS
Component Description

INFOID:0000000007578719

Item

Function

Door mirror remote control switch (mirror switch)

It supplies power to mirror motor through mirror switch and changeover switch.

Door mirror remote control switch
(changeover switch)

It transmits the LH/RH control of door mirror that supplies power.

Door mirror motor

It makes mirror face operate from side to side and up and down via integrated motor.

Revision: 2011 October

MIR-4

2012 JUKE

DOOR MIRROR SYSTEM
< WIRING DIAGRAM >

WIRING DIAGRAM

A

DOOR MIRROR SYSTEM
Wiring Diagram

INFOID:0000000007578720

For connector terminal arrangements, harness layouts, and alphabets in a
described in wiring diagram), refer to GI-12, "Connector Information".

B

(option abbreviation; if not
C

D

E

F

G

H

I

J

K

MIR

M

N

O

P

JCLWA4297GB

Revision: 2011 October

MIR-5

2012 JUKE

DOOR MIRROR REMOTE CONTROL SWITCH (MIRROR SWITCH/
CHANGEOVER SWITCH)
< DTC/CIRCUIT DIAGNOSIS >

DTC/CIRCUIT DIAGNOSIS
DOOR MIRROR REMOTE CONTROL SWITCH (MIRROR SWITCH/
CHANGEOVER SWITCH)
Component Inspection

INFOID:0000000007578721

1.CHECK MIRROR SWITCH & CHANGEOVER SWITCH
1.
2.
3.

Turn ignition switch OFF.
Disconnect door mirror remote control switch connector.
Check door mirror remote control switch.
Door mirror remote control switch

condition
Chenge over
switch

Terminal

Driver side

Passenger side

13

6

12

5

13

5

12

6

13

2

12

6

13

6

12

2

13

7

12

4

13

4

12

7

13

3

12

7

13

7

12

3

Mirror switch

Continuity

RIGHT

LEFT
LEFT
UP

DOWN
Existed
RIGHT

LEFT
RIGHT
UP

DOWN

Is the inspection result normal?
YES >> INSPECTION END.
NO
>> Replace door mirror remote control switch.

Revision: 2011 October

MIR-6

2012 JUKE

SQUEAK AND RATTLE TROUBLE DIAGNOSES
< SYMPTOM DIAGNOSIS >

SYMPTOM DIAGNOSIS

A

SQUEAK AND RATTLE TROUBLE DIAGNOSES
Work Flow

INFOID:0000000007578722

B

C

D

E

F

G
SBT842

CUSTOMER INTERVIEW

H
Interview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diagnostic Worksheet during the interview to document the facts and conditions when the noise occurs and any
customer comments. Refer to MIR-11, "Diagnostic Worksheet". This information is necessary to duplicate the
I
conditions that exist when the noise occurs.
• The customer may not be able to provide a detailed description or the location of the noise. Attempt to obtain
all the facts and conditions that exist when the noise occurs (or does not occur).
• If there is more than one noise in the vehicle, perform a diagnosis and repair the noise that the customer is J
concerned about. This can be accomplished by performing a test drive with the customer.
• After identifying the type of noise, isolate the noise in terms of its characteristics. The noise characteristics
are provided so that the customer, service adviser, and technician use the same language when describing
K
the noise.
• Squeak – (Like tennis shoes on a clean floor)
Squeak characteristics include the light contact / fast movement / brought on by road conditions / hard surMIR
faces = high-pitched noise / softer surfaces = low-pitched noises / edge to surface = chirping
• Creak – (Like walking on an old wooden floor)
Creak characteristics include firm contact / slow movement/twisting with a rotational movement / pitch
dependent on materials / often brought on by activity.
M
• Rattle – (Like shaking a baby rattle)
Rattle characteristics include fast repeated contact / vibration or similar movement / loose parts/missing clip
or fastener / incorrect clearance.
N
• Knock – (Like a knock on a door)
Knock characteristics include hollow sounds / sometimes repeating / often brought on by driver action.
• Tick – (Like a clock second hand)
Tick characteristics include gentle contacting of light materials / loose components / can be caused by driver O
action or road conditions.
• Thump – (Heavy, muffled knock noise)
Thump characteristics include softer knock / dull sounds often brought on by activity.
P
• Buzz – (Like a bumblebee)
Buzz characteristics include high frequency rattle / firm contact.
• Often the degree of acceptable noise level varies depending upon the person. A noise that a technician may
judge as acceptable may be very irritating to a customer.
• Weather conditions, especially humidity and temperature, may have a great effect on noise level.

DUPLICATE THE NOISE AND TEST DRIVE

Revision: 2011 October

MIR-7

2012 JUKE

SQUEAK AND RATTLE TROUBLE DIAGNOSES
< SYMPTOM DIAGNOSIS >
If possible, drive the vehicle with the customer until the noise is duplicated. Note any additional information on
the Diagnostic Worksheet regarding the conditions or location of the noise. This information can be used to
duplicate the same conditions when the repair is reconfirmed.
If the noise can be duplicated easily during the test drive, to help identify the source of the noise, try to duplicate the noise with the vehicle stopped by doing one or all of the following items:
1) Close a door.
2) Tap or push/pull around the area where the noise appears to be coming from.
3) Rev the engine.
4) Use a floor jack to recreate vehicle “twist”.
5) At idle, apply engine load (electrical load, half-clutch on M/T models, drive position on A/T models).
6) Raise the vehicle on a hoist and hit a tire with a rubber hammer.
• Drive the vehicle and attempt to duplicate the conditions the customer states exist when the noise occurs.
• If it is difficult to duplicate the noise, drive the vehicle slowly on an undulating or rough road to stress the
vehicle body.

CHECK RELATED SERVICE BULLETINS
After verifying the customer concern or symptom, check ASIST for Technical Service Bulletins (TSBs) related
to the concern or symptom.
If a TSB relates to the symptom, follow the procedure to repair the noise.

LOCATE THE NOISE AND IDENTIFY THE ROOT CAUSE
1.

Narrow down the noise to a general area. To help pinpoint the source of the noise, use a listening tool
(Chassis ear: J-39570, engine ear, and mechanics stethoscope).
2. Narrow down the noise to a more specific area and identify the cause of the noise by:
• Removing the component(s) in the area that is / are suspected to be the cause of the noise.
Do not use too much force when removing clips and fasteners, otherwise clips and fasteners can be broken
or lost during the repair, resulting in the creation of new noise.
• Tapping or pushing/pulling the component(s) that is / are suspected to be the cause of the noise.
Do not tap or push/pull the component(s) with excessive force, otherwise the noise is eliminated only temporarily.
• Feeling for a vibration by hand by touching the component(s) that is / are suspected to be the cause of the
noise.
• Placing a piece of paper between components that are suspected to be the cause of the noise.
• Looking for loose components and contact marks.
Refer to MIR-9, "Inspection Procedure".

REPAIR THE CAUSE


-

If the cause is a loose component, tighten the component securely.
If the cause is insufficient clearance between components:
Separate components by repositioning or loosening and retightening the components, if possible.
Insulate components with a suitable insulator such as urethane pads, foam blocks, felt cloth tape, or urethane tape. A NISSAN Squeak and Rattle Kit (J-43980) is available through the authorized NISSAN Parts
Department.
CAUTION:
Never use excessive force as many components are constructed of plastic and may be damaged.
NOTE:
Always check with the Parts Department for the latest parts information.
The following materials are contained in the NISSAN Squeak and Rattle Kit (J-43980). Each item can be
ordered separately as needed.
URETHANE PADS [1.5 mm (0.059 in) thick]
Insulates connectors, harness, etc.
• 76268-9E005: 100 × 135 mm (3.937 × 5.315 in)
• 76884-71L01: 60 × 85 mm (2.362 × 3.346 in)
• 76884-71L02: 15 × 25 mm (0.591 × 0.984 in)
INSULATOR (Foam blocks)
Insulates components from contact. Can be used to fill space behind a panel.
• 73982-9E000: 45 mm (1.772 in) thick, 50 × 50 mm (1.969 × 1.969 in)
• 73982-50Y00: 10 mm (0.394 in) thick, 50 × 50 mm (1.969 × 1.969 in)
INSULATOR (Light foam block)
80845-71L00: 30 mm (1.181 in) thick, 30 × 50 mm (1.181 × 1.969in)
FELT CLOTHTAPE
Revision: 2011 October

MIR-8

2012 JUKE

SQUEAK AND RATTLE TROUBLE DIAGNOSES
< SYMPTOM DIAGNOSIS >
Used to insulate where movement does not occur. Ideal for instrument panel applications.
• 68370-4B000: 15 × 25 mm (0.591 × 0.984 in) pad
• 68239-13E00: 5 mm (0.197 in) wide tape roll
The following materials, not found in the kit, can also be used to repair squeaks and rattles.
UHMW (TEFLON) TAPE
Insulates where slight movement is present. Ideal for instrument panel applications.
SILICONE GREASE
Used in place of UHMW tape that is visible or does not fit. Only lasts a few months.
SILICONE SPRAY
Used when grease cannot be applied.
DUCT TAPE
Used to eliminate movement.

A

B

C

D

CONFIRM THE REPAIR
After repair is complete, test drive the vehicle to confirm that the cause of noise is repaired by test driving the
vehicle. Operate the vehicle under the same conditions as when the noise originally occurred. Refer to the
notes on the Diagnostic Worksheet.

Inspection Procedure

E

INFOID:0000000007578723

F

Refer to Table of Contents for specific component removal and installation information.

INSTRUMENT PANEL
Most incidents are caused by contact and movement between:
1. The cluster lid A and instrument panel
2. Acrylic lens and combination meter housing
3. Instrument panel to front pillar garnish
4. Instrument panel to windshield
5. Instrument panel mounting pins
6. Wiring harnesses behind the combination meter
7. A/C defroster duct and duct joint
These incidents can usually be located by tapping or moving the components to duplicate the noise or by
pressing on the components while driving to stop the noise. Most of these incidents can be repaired by
applying felt cloth tape or silicon spray (in hard to reach areas). Urethane pads can be used to insulate
wiring harness.
CAUTION:
Never use silicone spray to isolate a squeak or rattle. If the area is saturated with silicone, the
recheck of repair becomes impossible.

G

H

I

J

K

MIR

CENTER CONSOLE
Components to check include:
1. Shifter assembly cover to finisher
2. A/C control unit and cluster lid C
3. Wiring harnesses behind audio and A/C control unit
The instrument panel repair and isolation procedures also apply to the center console.

M

N

DOORS
Check the following items:
1. Finisher and inner panel making a slapping noise
2. Inside handle escutcheon connection to door finisher
3. Wiring harnesses tapping
4. Door striker out of alignment causing a popping noise on starts and stops
Tapping, moving the components, or pressing on them while driving to duplicate the conditions can isolate
many of these incidents. The areas can usually be insulated with felt cloth tape or insulator foam blocks from
the NISSAN Squeak and Rattle Kit (J-43980) to repair the noise.

TRUNK
Trunk noises are often caused by a loose jack or loose items put into the trunk by the customer.
In addition check for the following items:
Revision: 2011 October

MIR-9

2012 JUKE

O

P

SQUEAK AND RATTLE TROUBLE DIAGNOSES
< SYMPTOM DIAGNOSIS >
1. Trunk lid dumpers out of adjustment
2. Trunk lid striker out of adjustment
3. Trunk lid torsion bars knocking together
4. A loose license plate or bracket
Most of these incidents can be repaired by adjusting, securing, or insulating the item(s) or component(s) causing the noise.

SUNROOF/HEADLINING
Noises in the sunroof / headlining area can often be traced to one of the following items:
1. Sunroof lid, rail, linkage, or seals making a rattle or light knocking noise
2. Sunvisor shaft shaking in the holder
3. Front or rear windshield touching headlining and squeaking
Again, pressing on the components to stop the noise while duplicating the conditions can isolate most of these
incidents. Repairs usually consist of insulating with felt cloth tape.

SEATS
When isolating seat noise it is important to note the position the seat is in and the load placed on the seat
when the noise occurs. These conditions should be duplicated when verifying and isolating the cause of the
noise.
Causes of seat noise include:
1. Headrest rods and holder
2. A squeak between the seat pad cushion and frame
3. The rear seatback lock and bracket
These noises can be isolated by moving or pressing on the suspected components while duplicating the conditions under which the noise occurs. Most of these incidents can be repaired by repositioning the component
or applying urethane tape to the contact area.

UNDERHOOD
Some interior noise may be caused by components under the hood or on the engine wall. The noise is then
transmitted into the passenger compartment.
Causes of transmitted underhood noise include:
1. Any component mounted to the engine wall
2. Components that pass through the engine wall
3. Engine wall mounts and connectors
4. Loose radiator mounting pins
5. Hood bumpers out of adjustment
6. Hood striker out of adjustment
These noises can be difficult to isolate since they cannot be reached from the interior of the vehicle. The best
method is to secure, move, or insulate one component at a time and test drive the vehicle. Also, engine RPM
or load can be changed to isolate the noise. Repairs can usually be made by moving, adjusting, securing, or
insulating the component causing the noise.

Revision: 2011 October

MIR-10

2012 JUKE

SQUEAK AND RATTLE TROUBLE DIAGNOSES
< SYMPTOM DIAGNOSIS >

Diagnostic Worksheet

INFOID:0000000007578724

A

B

C

D

E

F

G

H

I

J

K

MIR

M

N

O

PIIB8740E

Revision: 2011 October

MIR-11

P

2012 JUKE

SQUEAK AND RATTLE TROUBLE DIAGNOSES
< SYMPTOM DIAGNOSIS >

PIIB8742E

Revision: 2011 October

MIR-12

2012 JUKE

INSIDE MIRROR
< REMOVAL AND INSTALLATION >

REMOVAL AND INSTALLATION

A

INSIDE MIRROR
Exploded View

INFOID:0000000007578725

B

C

D

E

F

G
JMLIA0400ZZ

H
1.

Windshield glass

2.

Mirror base

3.

Inside mirror assembly

: Do not reuse

I

Removal and Installation

INFOID:0000000007578726

CAUTION:
Never reuse the inside mirror assembly disassembled from mirror base.

J

REMOVAL
Slide the inside mirror assembly upward to remove.
NOTE:
Insert flat-bladed screwdriver (A) under the inside mirror (1).
Slide the inside mirror to the upper side while pushing the pawl
downward.
CAUTION:
Never use excessive force to remove the inside mirror because
it is inserted tightly into the mirror base.

K

MIR

M

JMLIA0055ZZ

N

INSTALLATION
Install in the reverse order of removal.
O

P

Revision: 2011 October

MIR-13

2012 JUKE

OUTSIDE MIRROR
< REMOVAL AND INSTALLATION >

OUTSIDE MIRROR
Exploded View

INFOID:0000000007578727

JMLIA1390ZZ

1.

Door mirror cover

2.

Actuator

3.

4.

Door mirror corner cover

5.

Door mirror assembly

Glass mirror

: Clip
: Pawl

DOOR MIRROR ASSEMBLY
DOOR MIRROR ASSEMBLY : Removal and Installation

INFOID:0000000007578728

CAUTION:
When removing, always use a remover tool that is made of plastic.

REMOVAL
1.

Disengage door mirror corner cover fixing clips with a remover
tool (A) and then remove door mirror corner cover.
: Clip

JMLIA1391ZZ

Revision: 2011 October

MIR-14

2012 JUKE

OUTSIDE MIRROR
< REMOVAL AND INSTALLATION >
2. Remove front door finisher. Refer to INT-12, "Removal and Installation".
3. Disconnect door mirror harness connector.
4. Remove door mirror mounting nuts, and then remove door mirror assembly.

A

INSTALLATION

B

Install in the reverse order of removal.

GLASS MIRROR
GLASS MIRROR : Removal and Installation

INFOID:0000000007578729

REMOVAL
1.
2.
3.

Place the glass mirror upward.
Put a strip of protective tape (B) on mirror body (1).
Insert a small flat-bladed screwdriver (A) into the recess at lower side between glass mirror (2) and actuator, and push up pawls to remove glass mirror lower side.
NOTE:
Insert a small flat-bladed screwdriver into recesses, and push up
while rotating (twisting) to make work easier.

C

D

E

F

G

H

I

J

K

MIR
JMLIA1479ZZ

4.

Remove glass mirror from mirror body.

M

INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, visually check that pawls are securely engaged.

N

DOOR MIRROR COVER
DOOR MIRROR COVER : Removal and Installation

INFOID:0000000007578730

REMOVAL
1.
2.

Remove door mirror assembly from the door panel. Refer to MIR-14, "DOOR MIRROR ASSEMBLY :
Removal and Installation".
Remove the glass mirror. Refer to MIR-15, "GLASS MIRROR : Removal and Installation".

Revision: 2011 October

MIR-15

2012 JUKE

O

P

OUTSIDE MIRROR
< REMOVAL AND INSTALLATION >
3. Disengage door mirror cover fixing pawls while pressing the
pawls toward the direction of the arrows.
: Pawl

JMLIA1480ZZ

4.

Insert two remover tools (A) and (B) between door mirror cover
and mirror body to disengage the pawls, and then remove door
mirror cover.
: Pawl

JMLIA1183ZZ

5.

Remove actuator fixing screws (A).

JMLIA1478ZZ

6.

Disconnect actuator harness connector and then remove actuator from door mirror.

INSTALLATION
Note the following item and then install in the reverse order of removal.
CAUTION:
After installation, visually check that pawls are securely engaged.

Revision: 2011 October

MIR-16

2012 JUKE

DOOR MIRROR REMOTE CONTROL SWITCH
< REMOVAL AND INSTALLATION >

DOOR MIRROR REMOTE CONTROL SWITCH

A

Exploded View

INFOID:0000000007578731

B

C

D

E

F

JMLIA1446ZZ

1.

Instrument lower panel

2.

Switch bracket

3.

Door mirror remote control switch

Removal and Installation

INFOID:0000000007578732

REMOVAL
1.
2.
3.

G

H

Remove the instrument lower panel. Refer to IP-12, "Removal and Installation".
Remove mounting screws and remove switch bracket from instrument lower panel.
Remove door mirror remote control switch (1) from switch
bracket (2) using remover tool (A).

I

: Pawl

J

K

JMLIA1447ZZ

MIR

INSTALLATION
Install in the reverse order of removal.
M

N

O

P

Revision: 2011 October

MIR-17

2012 JUKE


Documenti correlati


Documento PDF smontaggio montaggio del condotto aria aspirata del motore a valle del filtro aria
Documento PDF uniformcommercialcode
Documento PDF guida pistone1
Documento PDF smontaggio testine
Documento PDF there is a light that never goes out
Documento PDF luciano ligabue il rumore dei baci a vuoto


Parole chiave correlate